Expander Mandrels – 30 Cal. Cartridges


Expander Mandrels are only compatible with Short Action Customs Modular Sizing Dies.
NOTE: SAC 30 Cal. Dies already include the 5/16″ Collet needed to use the Expander Mandrels. If you need an additional collet they can be purchased separately HERE.
Expander Mandrel Size:
Category: Product ID: 5115


.30 Cal Expander Mandrels

Precision Ground, Solid Carbide, Available in .0005” Increments

Our solid carbide expander mandrels are made to be used in any of our Modular sizing dies with the appropriate collet.

Required Collet:  5/16″ (.30 Caliber dies come standard with a 5/16″ Collet)

Our Expander Mandrel is unique because it expands the necks of your brass on the “down stroke” instead of the “up stroke” of your press. Furthermore, the precision ground expanding detail is high up in the die, slightly below the cartridge’s neck/shoulder detail. The benefit is that as the cartridge is pulled out of the die, the cartridge neck transitions from the neck bushing to the expander mandrel right away. This 1). ensures a seamless transfer of the cartridge neck from the Neck Sizing Bushing to the Expander Mandrel. 2). Expanding is more consistent because the brass starts off perfectly centered in the die and is immediately expanded as the brass is drawn out of the die body. This is ideal, where expanding on the “up stroke” puts all the stress and pressure on an unsupported case/neck which introduces neck runout.

Additional information

Weight 2 oz
Dimensions 4 × 3 × 1 in


There are no reviews yet.

Be the first to review “Expander Mandrels – 30 Cal. Cartridges”

Your email address will not be published. Required fields are marked *

You may also like…