Barrel Vise Bushings

$4000

SKU: N/A Categories: , , Product ID: 4228

Description

Barrel Vise Bushings

 We can supply you with just about any bushing you need to properly clamp onto any barrel under 1.350″ in diameter. 

Note: These bushings are included in the Barrel Vise Kits

  • .865″-.870″ Tapered Bushings

  • .925″-.930″ Tapered Bushings

  • 1.000″ Straight Bushings

  • 1.200″ Straight Bushings

  • 1.250″ Straight Bushings

Available Bushings

  • Tikka T3 Sporter contour.

  • .700″-.756″ tapered bushing is for “pencil” barrel contours which have a rapid reduction in diameter right in front of the largest diameter of the barrel on the chamber end. This bushing works great with Remington Sporter type contours about 5″ to 6″ in front of the action face.

  • .865″-.870″ tapered bushing is one of the more popular bushing sizes. It can be used on medium to light barrel contours like the Remington Sendero if a 1.250″ bushing cannot be placed directly in front of the action face, the .865″-.870″ bushing can be placed a few inches forward.

  • .925″-.930″ Tapered Bushings
  • .956″-.965″ tapered bushing is for Accuracy International and similar contoured barrels which allow the barrel to be clamped in front of the handguard for easy removal. These bushings also work well with other larger diameter barrels like Heavy Palma and Heavy Varmint contours

  • 1.000″ Straight Bushings
  • 1.075″ Straight Bushings, Pre-fit barrels which have a 1.0625″ contour at the chamber end. And Savage Barrels
  • 1.130″ straight bushing is for barrels similar to the FN SPR contour where the barrel is to be clamped directly in front of the action face.

  • 1.200″ straight bushing is one of the most popular bushing sizes. It is used to properly clamp M40, Sporter contours and most varmint contours in addition to any barrel with a straight section of 1.200″ for more than 1.5″ long.

  • 1.250″ straight bushing is one of the most popular bushing sizes. It is used to properly clamp MTU, Heavy Palma, Medium Palma, and any barrel with a straight section of 1.250″ for more than 1.5″ long.

  • 1.350″ straight bushing is used for larger contoured barrels for action such as the Surgeon XL which use a 1.350″ barrel diameter. This bushing can be clamped directly in front of the action face.

  • 17mm
  • 19mm

 

Note: These bushings are included in the Barrel Vise Kits

  • .865″-.870″ Tapered Bushings

  • .925″-.930″ Tapered Bushings

  • 1.000″ Straight Bushings

  • 1.200″ Straight Bushings

  • 1.250″ Straight Bushings

Additional information

Weight 2 oz
Dimensions 4 × 3 × 2 in
Barrel Vise Bushing Size

Tikka T3 Sporter Taper (.920" – 1.110"), Savage, Bravo V Block, .700" – .756" Tapered, .865" – .870" Tapered, .925" – .930" Tapered, .956" – .965" Tapered, 1.000" Straight, 1.070" straight "Prefit", 1.130" Straight, 1.200" Straight, 1.250" Straight, 1.350" Straight, 17mm Straight, 19mm Straight

Reviews

There are no reviews yet.

Be the first to review “Barrel Vise Bushings”

Your email address will not be published.

You may also like…